Skip to main content

Benefits of Jet Pumps - Compared to Gas Lift

Lower Life Time Costs . No Moving Parts Down Hole . Optimise Production . Controllable. Efficient. Reliable.


Lower Lifetime Costs

Capital Costs

A jet pump system can be installed at greatly reduced costs compared to Gas Lift systems with no compression costs or gas distribution systems needed.

Operating Costs

Lower power usage costs are achieved from the surface unit due to increase in jet pump efficiency compared to costly interventions to change out Gas Lift System.

Operating Efficiency

Jet pumps have the best overall total process efficiency, in Horse Power (HP) per barrel produced. Achieved through a combination of the Jet pump’s design increasing critical flow areas to increase efficiency dramatically and the 90% efficient Hydra-Cell power fluid pump.

Down Hole Equipment

Jet pumps have no moving parts in the pump resulting in a long service life, no run dry issues. Simple repair procedures is all that is needed to run and retrieve pump downhole.


Optimise Production

Reservoir Access

Jet pump’s excellent design allows for full bore access to the reservoir. There is no limitations to access and no workover is required for any remedial work. No run dry issues.

Number of Wells

From single to multiple wells operating from one single surface hydraulic package greatly reduces lift cost with jet pumps.

Well Intervention

Jet pumps do not need a workover or pulling rig. Jet pumps can be easily circulated to the surface without pulling the tubing or it can be retrieved by wireline. This ensures easy maintenance and a longer service life.

Flexible optimisation of production by simple changes to injection power fluid flow and pressure, mixing tube and nozzle combinations. Especially with changing well conditions.


Designed for Flexibility and Reliability

Well Inclination

Jet pumps are excellently suited to vertical and deviated completion.

Depth Limit

No restrictions with jet pumps with a practical depth to 20,000 ft. Not dependant on being controlled by system injection pressure or gas and fluid rate.

Tubing and Casing Range

Great flexibility is available and no limitations with the jet pumps range of tubing sizes from 23/8” to 4½”.

Sand and Solids Handling Ability

As with gas lift systems, jet pumps are also reliable at handling high solids and sand production. Excellent reliability is assured with jet pumps due to increased flow areas, robust parts, special metallurgy and coatings.



no overworker

Installation took less than two days, greatly minimising well
down time.

Case Study

Jet pump greatly increases oil and gas production using less energy and eliminating the need for costly make up gas.